Dual Fuel Range Cooker With 13amp Plug
Are you a home chef who loves the responsive cooking control of gas cooktops, but requires an electric oven for baking? Find a dual-fuel range cooker that gives you the best of both worlds.
Gas cooktops are favored by many home chefs who have years of experience in the kitchen because of their superior temperature control. They also permit the use of advanced cooking techniques like charring. These powerful stoves can be costly, especially if they require an extra gas connection and an electrician to install them.
What is a 13amp outlet?
If you own a dual fuel range cooker (also called a gas and electric oven) then you'll require an appropriately rated 13 amp plug. The plug should also be hard-wired by a certified electrician to the cooker ring.
This ensures the current flowing through the plug does not exceed the safe limit, which could lead to an electrical fire. The current is controlled by a fuse inside the plug. The fuse blows when the current flows through it over its capacity, which safeguards the appliance from overload of electricity.
The fuse is rated 13 amps, which is shown on top of the plug. This indicates the maximum amount of current the plug could carry without damaging the appliance or heating the socket. It is essential to ensure that when replacing fuses, you always use the same rated amperage as the original. If you replace the fuse with one of a different rating, then you are at risk of overheating the socket and putting you and others at serious risk.
A 13 amp fuse will be a ceramic type that is extremely durable and can withstand the extreme temperatures generated by a range cooker. Ceramic elements are also fire-resistant and is therefore a better option over other types.
There are a variety of ways to install the 13 amp plug. The plug can be connected to a live socket with screws or a plastic jaw cord clamp. The cord clamp should be tightened after the plug is securely pushed into position.
Before connecting the wires, you may have to remove the wiring diagram on cardboard that is placed over the pins of certain plugs. It is vital that the wires are trimmed to the correct length as leaving them too long can result in them becoming crushed when the plug cover is replaced. The earth wire should be the longest to ensure that it is connected before the line and neutral pins.
How do I install an outlet with 13amps?
The majority of dual fuel range cookers sold in the UK are connected to 13 amp plug sockets and this is crucial as ovens can draw a considerable amount of current, and standard plug sockets are only designed to handle 10 amps.
Generally speaking, new appliances must be equipped with an outlet at the time of sale. This is all part of complying with the Plugs and Sockets etc (Safety) Regulations 1994. Older appliances might not have a plug and this could be the reason for the issue.
When connecting a cooker to an existing plug socket the first step is to ensure that the rating of the fuse in the box is the same as that of the plug's. This is vital because a faulty fuse could be dangerous.
It is also recommended that the fuse has been completely seated into the cartridge, and that there isn't any movement. The next step is to prepare the flex that will be used. Remove the sheathing to reveal the three conductors that are insulated. Use a utility blade to cut the sheathing beyond the cord grip at the point of entry into the plug. This won't penetrate the insulated conductors. The nick should be wide enough that the sheathing can split and enlarge the nick when it is pulled back to reveal the cable underneath. Cut off the excess sheathing leaving about 40mm beyond the flex.
The flex is then positioned over the plug, with the earth terminal at the top and live and neutral terminals at the bottom. Using the conductors with the colors to guide you to the right direction, the sheathing should be removed from each pin and the internal cable is then plugged to the correct terminal using the cord grip. If the plug has a cord clamp that is screw-type, unwind it and then pull the insulation back to reveal the copper wires. Connect each insulated wire to the correct terminal using the plug's channel. Begin with the earth conductor, then the neutral, and then the live.
What is the maximum draw of a 13 amp plug?
The maximum current draw of an 13amp plug is 3kw at 230 volts. This is a lot of power, but the standard fuse on the UK plug will not fail until the cable reaches a dangerous temperature. A damaged plug or socket could cause a fire therefore it is important to be aware of how much you are using particularly in the kitchen.
The fuse inside the plugtops are made of ceramic, around 25mm in length and rated 240V mains. The fuses are marked with a BS Kitemark or a similar mark on the side and they will contain sand. Glass or plastic alternatives are available, but they should not be used in conjunction with a live plug.
The majority of dual fuel range cookers sold in the UK need to be hard-wired and cannot be plugged directly into the wall socket. They are typically connected to a specific cooker ring circuit that is suitable for appliances that draw up to 20 amps.
Check the ring circuit of your home by using the fuse box, or ask an electrician nearby. Ask whether the sockets are connected to the same ring or if they're distinct. They should also be able tell you if there is an individual circuit that powers your oven.
The size of your kitchen is a major factor when you are looking to buy a dual fuel range cooker. Luckily, we have a great choice of cookers to fit any space, from compact 50 - 60cm dual fuel models as well as huge 90cm+ double oven options from leading brands like Rangemaster and StovesAreUs.
If you're after something different, don't worry - we also have a great selection of electric and gas multi-functional cookers. These multifunction cookers can be used to cook a variety of dishes including curries, casseroles, and pasta!
Currys offers a wide range of Cookers. Explore our online selection or stop by our store to see the range. We offer free delivery and home installation on selected range cookers, as well as flexible payment options. If you have any questions our team is on hand to help send us an email or give us a phone call. Credit is subject to status, and terms and condition apply.
What is the maximum draw of the switch on a cooker?
There is a lot of confusion regarding the maximum current draw for a cooker switch. The truth is that most cookers aren't made to connect to the standard socket, but rather are hard wired and connected to a specific oven ring circuit. This is because they will often draw more than 20 amps of power when the electric oven and gas hob are being used.
You will not find dual fuel range cookers that are able to be fitted in standard sockets, because this could create a significant fire risk and would violate electrical regulations. A licensed electrician should install new electrics in the kitchen, connecting them to the cooker. They will also make sure that the total load of the oven and hob do not exceed the circuit's capacity.
Dual fuel range cookers mix the ability to cook with the sensitivity of a gas stove with the precision and accuracy of an electric oven. This is the reason they are well-liked by chefs and cooks at home alike. If you're looking to test various cooking techniques like searing and charring, a dual fuel range cooker is the perfect option.
When you are looking to purchase a new range cooker you'll have to consider several factors like size, function and price. Additionally, you'll also need to make sure that your house has the right gas hook-up for the appliance. If silver dual fuel range cookers 're not sure, it is best to book a Gas Safe engineer to inspect your property before installation.
Currys dual fuel range cookers come in a variety of models to suit all budgets. From affordable models from Indesit and Zanussi to our own Essentials collection. If you are seeking something more sophisticated We have a range of premium JennAir models, which feature a number innovative features.
When purchasing a new dual fuel range cooker, it is important to check the manual of the owner for specific information on the gas and electrical requirements. You must ensure that your home has a suitable gas hook-up and you may have to hire a plumber to install this for you, if needed. Depending on the home you'll also need to make sure that you have a dedicated cooker ring circuit installed and endorsed by a licensed electrician.